Pullers & Separators

Automotive

capacitymm

jaw_reachmm

maximum_jaw_openingmm

number_of_legs

product_type

reachmm

brand

categoryId

stockStatus

Automotive Tools

Pullers

Kennedy

Contents: 1 x hydraulic ram. 3 x 4", 6" & 8" puller legs. 1 x twin head. 1 x triple head. 1 x 50mm ram extension. 1 x 100mm ram extension. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x 75 - 105mm separator. 1 x bolt. 1 x ram ring. 1 x ram nut. Blow moulded storage case

This hand-operated hydraulic puller and separator set from Kennedy® is manufactured from high-quality material to provide excellent performance in automotive repair settings. The twenty-five-piece set with an industrial strength ten-tonne capacity provides everything the operator should need to get the job done.

Features and Benefits
• Tough, impact-resistant construction 
• Durable carry case included 
• Industrial strength kit 

Contents 
• 1x hydraulic ram (1-1/2in. dia.)
• 3x 4in. puller legs
• 3x 6in. puller legs
• 3x 8in. puller legs
• 2x 230mm extension rods
• 1x 25.4mm x 50.8mm extension rod
• 1x 25.4mm x 101.6mm extension rod
• 2x 200mm main rods
• 1x ram ring
• 1x separator (20mm-105mm)
• 1x beam
• 1x twin head
• 1x triple head
• 1x ram nut
• 1x centre adapter 
• 1x bolt
• 1x storage case

Typical Applications
• Agricultural machines
• Garage 
• Industrial use

Hydraulic Puller/ Separator Set

HYDRAULIC PULLER SET (25-PCE)

Mechanical pullers that are ideal for the removal of gears, ball races, bearings, pulleys and sprockets from a drive shaft. 

Features and Benefits
• All sizes have double-ended, adjustable and reversible legs

Typical Applications
• Internal and external tasks

Double Ended Mechanical Pullers

Double Ended Mechanical Puller, 4" 3-Jaw

Double Ended Mechanical Puller, 8" 3-Jaw

Double Ended Mechanical Puller, 6" 3-Jaw

Separators & Coil Spring Compressors

Contents: 1 x 7" thrust bolt. 1 x 30-50mm separator. 1 x 50-75mm separator. 2 x 80 & 100mm main rods. 2 x 90 & 110mm. extension rods. 1 x beam.

30 - 75mm 
For removing bearings, gears, sprockets and bushes. Metal storage case.
Contents:
1x 7” thrust bolt.
1x 30 - 50mm separator.
1x 50 - 75mm separator.
2x 80 and 100mm main rods.
2x 90 and 110mm extension rods.
1x beam.

Mechanical Separator Set

MECHANICAL BEARING SEPARATOR SET 30-75mm

Double Ended Mechanical Puller, 3" 2-Jaw

Contents: 1 x combination head. 1 x hydraulic ram. 3 x 3 position puller legs. 6 x leg connectors. 6 x screw nuts, bolts & washers. 1 x 32mm ext. rod. 1 x ram nut. 1 x blow moulded storage case.

10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm. 

Features and Benefits
• Highly versatile - can be used as a two or three legged puller with the same head
• Generous 10 ton capacity for excellent performance 
• Supplied with storage case to keep kit safe, secure and tidy

Contents 
• 1x combination head
• 1x hydraulic ram
• 3x three position puller legs
• 6x leg connectors
• 6x screw nuts, bolts and washers
• 1x 32mm extension rod


6-Way Hydraulic Puller Set, 18-Piece

10 Ton Hydraulic Ram Puller Set

Fully hardened & chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded case.

3 Jaw Internal & External Multi-function Slide Hammer Puller Set.
Slide hammer design for removing bearings from blind housings. 

Features and Benefits
• Fully hardened and chromed carbon steel slide hammer with a 1.2kg weight
• The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar
• The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position
• Durable blow moulded case

Typical Applications
• Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. 

Contents
• 6 Piece Set Contents: 1x T-bar. 1x hammer 1.2kg. 1x 3 jaw internal puller 15 - 30mm. 1x 3 jaw internal puller 30 - 80mm. 1x 3 jaw external puller 15 - 80mm. 1x blow moulded case

Slide Hammer Puller Set

INTERNAL & EXTERNAL PULLER KIT

Double Ended Mechanical Puller, 4" 2-Jaw

Double Ended Mechanical Puller, 3" 3-Jaw

Hardened steel screws and cast steel claws.

2 Legged
Central hexagonal drive with wrap over coil claws which can be reversed for spreading applications. Suitable for use on cars and light commercial vehicles. 
Use with 21mm/13/16” AF open ended spanner. 
Maximum jaw opening: 250mm. 

3 Legged
Each leg has one free moving claw and one threaded claw with a 1/2” square drive or 24mm hexagon drive - can be used with air tools or spanners. Fitted with safety hooks to prevent accidental release. Suitable for use on cars and commercial vehicles and allows safe compression of heavier springs. 
Maximum jaw opening: 240mm.

Spring Compressor Sets

SPRING COMPRESSOR SET - 2 LEGGED

Double Ended Mechanical Puller, 6" 2/3-Jaw

Both sets contain: 1 x hydraulic ram. 1 x separator. 2 x 200mm main rods. 2 x 230mm extension rods. 1 x beam. 1 x ram nut. HS7 (only) also contains 1x 80mm push plate 1x 50mm ram extension. 1x 100mm ram extension.

HS7   105 - 150mm 
HS11   75 - 105mm
For removing bearings, gears, sprockets and bushes. 
10 ton capacity hydraulic ram with tommy bar. Metal storage case.
Both sets contain:
1x hydraulic ram.
1x separator. 
2x 200mm main rods.
2x 230mm extension rods.
1x beam.
1x ram nut.
HS7 (only) also contains 
1x 80mm push plate.
1x 50mm ram 
extension.
1 x 100mm ram 
extension.

HS7 Set Illustrated

Hydraulic Separator Sets

HYDRAULIC BEARING SEPARATOR SET 105-150mm

Double Ended Mechanical Puller, 6" 2-Jaw

Double Ended Mechanical Puller, 8" 2/3-Jaw

For removing bearings, gears and bushes from shafts where access with a mechanical puller is restricted. Separators have tapered edge for insertion behind close fitting bearings, gears and bushes. 
Jaw hardness: 42° - 45° HRC.

This range of bearing separators are ideal for removing bearings, gears and bushes from shafts, particularly where access with a mechanical puller is restricted. They have tapered edges for insertion behind close fitting bearings, gears and bushes. 

Features and Benefits
• Jaw hardness: 42° - 45° HRC
• Tapered edges

Typical Applications
• Removing bearings, gears and bushes from shafts

Bearing Separators

50mm BEARING SEPARATOR

105mm BEARING SEPARATOR

10 tonne capacity grease filled hydraulic ram with spring loaded plunger. Provides direct non-twisting application of thrust that is more effective and secure than a mechanical thrust screw. Fully threaded body allows for quick and easy height adjustment. With tommy bar.

Fits most brands of pullers and ball joint separators including Kennedy, Sykes-Pickavant, Sealey, Draper, Bergen, Clarke etc.
Capacity: 10 tonne.
Length excluding handle: 190mm. 
Diameter of ram: 40mm. 
Thread pitch: 16 gauge x 3/8 BSW

10 ton capacity grease filled hydraulic ram with spring loaded plunger. Provides direct non-twisting application of thrust. Fully threaded body allows for quick and easy height adjustment. With tommy bar.

Features and Benefits
• Fits most brands of pullers and ball joint separators including Kennedy, Sykes-Pickavant, Sealey, Draper, Bergen, Clarke etc.
• More effective and secure than a mechanical thrust screw

Technical Information
• Capacity: 10 ton
• Length excluding handle: 190mm
• Diameter of ram: 38mm
• Thread pitch: 16 gauge x 3/8 BSW

10 Ton Hydraulic Ram

10- TON HYDRAULIC RAM

Double Ended Mechanical Puller, 8" 2-Jaw

Double Ended Mechanical Puller, 4" 2/3-Jaw

Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints.

100mm Overall Length - Restricted Access
Designed for use in hard to reach and confined areas. Mainly for use on Asian import cars.

Ball Joint Separators

BALL JOINT SEPARATOR

UNIVERSAL BALL JOINT REMOVER

Fully hardened & chromed carbon steel slide hammer with a 1.2kg weight. Slide hammer design for removing bearings from blind housings. Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against. The bearing is removed by the impact action of the slide hammer weight hitting the stop at the end of the bar. The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position. Blow moulded storage case.Functions:2 Jaw internal or external puller. 3 jaw internal or external puller.Hub puller.Dent puller.Lip or edge puller.Grip Wrench Puller.

Designed to quickly remove bearings from blind housings, the slide hammer puller set from Kennedy® is strong and durable. This multi-function tool set is constructed from fully hardened, chrome carbon steel for exceptional value for money and a long service life.

Features and Benefits
• Suitable for use where a shaft or other solid surface is not available for a thrust bolt or hydraulic ram to push against
• The bearing is easily removed by the impact action of the slide hammer weight hitting the stop at the end of the bar
• The puller legs are securely located on the bearing by screwing down the tapered nut to lock the arms in position
• Supplied with a storage case for highly portable and organised tools

Contents
• 1x T-bar
• 1x hammer
• 1x two jaw head
• 1x three jaw head
• 1x leg locking nut
• 1x grip wrench adaptor
• 1x tapping adaptor and hook
• 2x axle pullers
• 3x 120mm puller legs
• 3x screw and nut assemblies
• 1x blow moulded storage case

Slide Hammer Bearing Puller, 16 Piece Set

75mm BEARING SEPARATOR

Contents: 1 x yoke. 1 x thrust bolt. 1 x ram nut. 3 x 75mm screws (3/8" x 24 UNF). 3 x 75mm screws (3/8" x 16 UNC). 1 x plastic storage tray.

SWP9 Steering Wheel
Suitable for GM, Ford and Chrysler vehicles. Also suitable for removing pulleys and fly wheels.
Contents: 1x yoke, 1x thrust bolt. 1x thrust cap. 2x 75mm screws (5/16" x 24 UNF). 2x 75mm screws (3/8" x 16 UNC). 2x 90mm screws (5/16" x 18 UNC). 1x plastic storage tray.

HPB9 Harmonic Balance
For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2" to 4 5/8"). Ductile steel yoke.
Contents: 1x yoke. 1x thrust bolt. 1x ram nut. 3x 75mm screws (3/8" x 24 UNF). 
3x 75mm screws (3/8" x 16 UNC). 1x plastic storage tray.

CP18 Combination
Steering wheel puller suitable for GM, Ford and Chrysler vehicles. For harmonic balance removal, timing gears and other parts with bolt circle diameters from 38 to 117mm (1 1/2" to 4 5/8").
Contents: As SWP9 and HPB9 above.

Pullers & Separators

Kennedy

HYDRAULIC PULLER SET (25-PCE)

Kennedy

Double Ended Mechanical Puller, 4" 3-Jaw

11 Variations

Kennedy

Double Ended Mechanical Puller, 8" 3-Jaw

11 Variations

Kennedy

Double Ended Mechanical Puller, 6" 3-Jaw

11 Variations

Kennedy

MECHANICAL BEARING SEPARATOR SET 30-75mm

Kennedy

Double Ended Mechanical Puller, 3" 2-Jaw

11 Variations

Kennedy

10 Ton Hydraulic Ram Puller Set

Kennedy

INTERNAL & EXTERNAL PULLER KIT

Kennedy

Double Ended Mechanical Puller, 4" 2-Jaw

11 Variations

Kennedy

Double Ended Mechanical Puller, 3" 3-Jaw

11 Variations

Kennedy

SPRING COMPRESSOR SET - 2 LEGGED

2 Variations

Kennedy

Double Ended Mechanical Puller, 6" 2/3-Jaw

11 Variations

Kennedy

HYDRAULIC BEARING SEPARATOR SET 105-150mm

2 Variations

Kennedy

Double Ended Mechanical Puller, 6" 2-Jaw

11 Variations

Kennedy

Double Ended Mechanical Puller, 8" 2/3-Jaw

11 Variations

Kennedy

50mm BEARING SEPARATOR

4 Variations

Kennedy

105mm BEARING SEPARATOR

4 Variations

Kennedy

10- TON HYDRAULIC RAM

Kennedy

Double Ended Mechanical Puller, 8" 2-Jaw

11 Variations

Kennedy

Double Ended Mechanical Puller, 4" 2/3-Jaw

11 Variations

Kennedy

BALL JOINT SEPARATOR

2 Variations

Kennedy

UNIVERSAL BALL JOINT REMOVER

2 Variations

Kennedy

Slide Hammer Bearing Puller, 16 Piece Set

Kennedy

75mm BEARING SEPARATOR

4 Variations

Kennedy

HARMONIC BALANCE PULLER KIT (9-PCE)

3 Variations

Key Information

Group Policies

© 2024 Cromwell. All rights reserved.